Canna Coco – How to use

  • Shake bottle well before use
  • Fill nutrient reservoir with water
  • Add Coco to the nutrient reservoir with the dilution ratio 1:250 (400 ml A and 400 ml B per 100 L of water) Add Coco A to the nutrient reservoir Stir well, then add Coco B Again, stir well and let mixture stand for some hours
  • The EC of Coco dissolved in (tap) water varies between 1,2 – 2,3 mS (= the solution EC + the water EC)
  • Recommended pH: 5.5 – 6.2
  • When growing intensively feed the plants 1-3 times a day with this nutrient and make sure the drain will be between 10% and 20%
  • In general this means 3-6 Liter of nutrient per m² per day

Storage, health & safety and other directions

  • CANNA Coco nutrient can be used for the growing and flowering phase contrary to other (Canna) nutrients
  • Do not mix A & B concentrate directly; Insoluble combinations will occur which the plant cannot absorb
  • Store closed in a dark and frost-proof place (UV light breaks down iron chelates in the nutrient)
  • Keep out of reach of children

Comments are closed.

Rss Feed Tweeter button Facebook button Reddit button Linkedin button Delicious button Digg button Stumbleupon button Newsvine button Youtube button